System Configuration; Access Control Management - HIKVISION DS-K2210 User Manual

Main elevator controller
Hide thumbs Also See for DS-K2210:
Table of Contents

Advertisement

After running the client software, you can open the wizards (including video wizard, video wall
wizard, security control panel wizard, access control and video intercom wizard, and attendance
wizard), to guide you to add the device and do other settings and operations. For detailed
configuration about the wizards, please refer to the Quick Start Guide of iVMS-4200.
7.2

System Configuration

Purpose:
You can synchronize the missed access control events to the client.
Steps:
1. Click Tool – System Configuration.
2. In the System Configuration window, check the Auto-synchronize Access Control Event
checkbox.
3. Set the synchronization time.
The client will auto-synchronize the missed access control event to the client at the set time.

Access Control Management

7.3
Purpose:
The Access Control module is applicable to access control devices and video intercom. It provides
multiple functionalities, including person and card management, permission configuration, access
control status management, video intercom, and other advanced functions.
You can also set the event configuration for access control and display access control points and
zones on E-map.
Note:
For the user with access control module permissions, the user can enter the Access Control
module and configure the access control settings.
Click
in the control panel, and check Access Control to add the Access Control module to
the control panel.
Main Elevator Controller User Manual
29

Advertisement

Table of Contents
loading

Table of Contents