Adding Permission - HIKVISION DS-K2210 User Manual

Main elevator controller

Hide thumbs Also See for DS-K2210:

Table of Contents

7.7.1 Adding Permission

Purpose:

You can assign permission for persons to enter/exist the access control points (doors) in this

section.

Notes:

 You can add up to 4 permissions to one access control point of one device.

 You can add up to 128 permissions in total.

Steps:

1. Click Add icon to enter following interface.

2. In the Permission Name field, input the name for the permission as desired.

3. Click on the dropdown menu to select a template for the permission.

Note:

You should configure the template before permission settings. You can click Add

Template button to add the template. Refer to Chapter 7.6 Schedule and Template for details.

4. In the Person list, all the added persons display.

Check the checkbox(es) to select person(s) and click > to add to the Selected Person list.

(Optional) You can select the person in Selected Person list and click < to cancel the selection.

5. In the Access Control Point/Device list, all the added access control points (doors) and door

stations will display.

Check the checkbox(es) to select door(s) or door station(s) and click > to add to the selected

list.

Main Elevator Controller User Manual

Table of Contents