Advertisement
Quick Links
Elevator control wiring and simple
Title:
configuration （Button mode）
Product:
Access Control Device
Elevator control wiring and simple configuration
Preparation：
Prepare the following equipment for the test, complete the test and then install
DS-k2210
Step 1: DIP Switch
The DIP switch of the card reader should be
The DIP switch of Ds-2100 should be
The DIP switch of distributed elevator controller (DS-K2M0016A) is
The device uses binary dialing codes
If you want to get dialing 3, Dial 1 and 2,if you want to get 4, Dial 3
Step2:Wring
Version:
Page:
（Button mode）
DS-k2m0016
decimal
decimal
1or 2.
v1.0
Date:
5/12/2017
1 of 7
DS-k1106
1 or 2.
decimal
3-10
Advertisement
Related Manuals for HIKVISION DS-k2210
Summary of Contents for HIKVISION DS-k2210
- Page 1 1 of 7 Elevator control wiring and simple configuration （Button mode） Preparation： Prepare the following equipment for the test, complete the test and then install DS-k2210 DS-k2m0016 DS-k1106 Step 1: DIP Switch The DIP switch of the card reader should be decimal 1 or 2.
- Page 2 Elevator control wiring and simple Title: Version: v1.0 Date: 5/12/2017 configuration （Button mode） Product: Access Control Device Page: 2 of 7 Step 3:Installation Installation of elevator controller and Elevator button connection controller installation diagram Principle: Button（The DIP switch of distributed elevator controller (DS-K2M0016A) is decimal 3-10） ：We control the buttons in the elevator, just put the NC and COM into the button circuit, if the permission is verifiable，the relay will action and you can press the corresponding button.
- Page 3 Elevator control wiring and simple Title: Version: v1.0 Date: 5/12/2017 configuration （Button mode） Product: Access Control Device Page: 3 of 7 Step 3:Configuration 1.4200(2.6.2.7) ConfigurationClick the access control 2.Activate device 3.Modify net info 4.Add to client User name：admin...
- Page 4 Elevator control wiring and simple Title: Version: v1.0 Date: 5/12/2017 configuration （Button mode） Product: Access Control Device Page: 4 of 7 To activate the password, you must check “Export to Group” 5.Determine the controller to display online 6.Configuring the correspondence between floor and relay Note: Drag the right relay to the corresponding floor Click on the upper right corner after the configuration is completed.
- Page 5 Elevator control wiring and simple Title: Version: v1.0 Date: 5/12/2017 configuration （Button mode） Product: Access Control Device Page: 5 of 7 8.add the staff permission 9.Add a person's card 10.Add permissions, check permissions and click on the right direction to click ok 11.When you click ok, you will be prompted to send it, and you can click directly.
- Page 6 Elevator control wiring and simple Title: Version: v1.0 Date: 5/12/2017 configuration （Button mode） Product: Access Control Device Page: 6 of 7 12.Can also be selected permissions set after clicking all issued (delete permission first, then issued all permissions, generally after adding new equipment use) or move issued (group permission to use when there is new change).
- Page 7 Elevator control wiring and simple Title: Version: v1.0 Date: 5/12/2017 configuration （Button mode） Product: Access Control Device Page: 7 of 7 First Choice for Security Professionals HIKVISION Technical Support...