Viewing Device Status - HIKVISION DS-K2210 User Manual

case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
 Add Offline Device: You can input 1 to enable adding the offline device, and then the
software will automatically connect it when the offline device comes online. 0 indicates
disabling this function.
 Export to Group: You can input 1 to create a group by the device name (nickname). All the
channels of the device will be imported to the corresponding group by default. 0 indicates
disabling this function.
 Channel Number: If you set 1 for Add Offline Device, input the channel number of the
device. If you set 0 for Add Offline Device, this field is not required.
 Alarm Input Number: If you set 1 for Add Offline Device, input the alarm input number of
the device. If you set 0 for Add Offline Device, this field is not required.
 Serial Port No.: If you set 5 as the adding mode, input the serial port No. for the access
control device.
 Baud Rate: If you set 5 as the adding mode, input the baud rate of the access control
device.
 DIP: If you set 5 as the adding mode, input the DIP address of the access control device.
 Hik-Connect Account: If you set 6 as the adding mode, input the Hik-Connect account.
 Hik-Connect Password: If you set 6 as the adding mode, input the Hik-Connect password.
5. Click and select the template file.
6. Click Add to import the devices.
The devices will be displayed on the device list for management after added successfully. You can
check the resource usage, HDD status, recording status, and other information of the added
devices on the list.
Click Refresh All to refresh the information of all added devices. You can also input the device
name in the filter field for search.

7.3.2 Viewing Device Status

In the device list, you can select the device and then click Device Status button to view its status.
Main Elevator Controller User Manual
45