Agilent Technologies 8360 B Series Service Manual page 451

Rear Panel Disassembly and Reassembly
Tools equired
9/16 in. Socket
-10 orx Screwdriver
-15 orx Screwdriver
5.5 mm Nut Driver
5/16 in. Open End Wrench
14 mm Open End Wrench
7 mm Nut Driver
#1 x 3 1/8 in. Pozidrive Screwdriver
#2 x 4 in. Pozidriv Screwdriver
Coax Extractor ool{Submin D Connector
Description and Procedure
Some steps in this procedure may not apply to all option con gurations. If a particular step
does not apply, continue with the next appropriate step.
o disassemble the rear panel and associated assemblies, follow this procedure in the order
given.
o reassemble the rear panel and associated assemblies, follow this procedure in the reverse
order.
Cable routing may a ect instrument performance. Refer to Figure 7-1 for a
CAUTION
diagram of the instrument cable routing.
Refer to the owchart in Figure 7-17 to determine the necessary disassembly steps for a given
assembly.
Agilent 8360 Disassembly and Replacement Procedures 7-21
Rear Panel