Security Setting > Mac Control - LevelOne MobilSpot WBR-3800 User Manual

Security Setting > MAC Control
The MAC Control allows you to assign different access rights for different users, and to
assign a specific IP address to a certain MAC address.
To enable MAC Address Control, make sure to tick on Enable.
There are two types of controls available:
 Connection Control: To control which wired and wireless clients can connect to
this device. If a client is denied access, it means the client cannot access the
Internet either. Choose "allow" or "deny" to allow or deny the clients whose MAC
addresses are not in the list.
 Association Control: To control which wireless client can be associated with
this MobilSpot™. If a client is denied, then it means the client cannot send or
receive any data via this MobilSpot™. Choose "allow" or "deny" to allow or deny
the clients with MAC addresses that are not in the list to associate to the wireless
network.
34