Mac Address Control - LevelOne WBR-5400 User Manual

4.6.4 MAC Address Control

MAC Address Control allows you to assign different access right for different users and to assign a
specific IP address to a certain MAC address.
MAC Address Control Check "Enable" to enable the "MAC Address Control". All of the
Connection control
Association control
settings in this page will take effect only when "Enable" is checked.
Check "Connection control" to enable the controlling of which wired can
connect to this device. If a client is denied to connect to this device, it
means the client can't access to the Internet either. Choose "allow" or
"deny" to allow or deny the clients, whose MAC addresses are not in the
"Control table" (please see below), to connect to this device.
Check "Association control" to enable the controlling of which wireless
client can associate to the wireless LAN. If a client is denied to associate to
the wireless LAN, it means the client can't send or receive any data via this
device. Choose "allow" or "deny" to allow or deny the clients, whose MAC
addresses are not in the "Control table", to associate to the wireless LAN.
49