LevelOne MobilSpot WBR-3800 User Manual page 13

Step 4:
1. Connect the power adapter to the receptor on the back panel of your WBR-3800
MobilSpot™.
2. Then plug the other end of the power adapter into a wall outlet or power strip
 The 3G LED will turn ON to indicate power has been applied.
 Other LEDs will flash ON and OFF as the WBR-3800 MobilSpot™ performs
initialization and Internet connection processes. This will take a few minutes.
 When complete, the following LEDs will illuminate green:
3G, WAN, LAN, and WLAN.
8