Step 2:
Insert your wireless 3G PC card (either 16bit or 32bit) into the WAN PCMCIA Card Slot
or plug your 3G USB modem into the USB interface.
Note: The WBR-3800 MobilSpot™ is designed to work with either UMTS, EDGE or EVDO and even HSDPA 3G
modem. Please refer to your service provider for detailed feature information.
Step 3:
Insert the Ethernet cable into LAN Port on the back panel of the WBR-3800 MobilSpot™
and an available Ethernet port on the computer you will use to configure the unit.
Note: The WBR-3800 MobilSpot™ LAN Port is "AutoMDI/MDIX." This provides Ethernet cable LAN Port access.
7
Need help?
Do you have a question about the MobilSpot WBR-3800 and is the answer not in the manual?