LevelOne MobilSpot WBR-3800 User Manual page 57

6. How do I reset my WBR-3800 MobilSpot™ to its factory default settings?
If other troubleshooting methods have failed, you may choose to Reset the
MobilSpot™ to its factory default settings.
To hard reset the MobilSpot™ to its factory default settings, follow the steps listed
below:
 Ensure the MobilSpot™ is powered on (for at least 20 seconds).
 Use a paper clip or pencil tip to press the reset button for ten seconds, and then
release.
 Do not power off the unit while it is rebooting.
 Once rebooted, the default settings will be restored.
 Remember to access the web configuration page using default IP of 192.168.0.1
and password "password".
7. What is VPN?
VPN stands for "Virtual Private Networking." VPNs create a "tunnel" through an
existing Internet connection using PPTP (Point-to-Point Tunneling Protocol) or IPSec
(IP Security) protocols with various encryption schemes including Microsoft
Challenge Handshake Authentication Protocol (MSCHAP).
This feature allows you to use your existing Internet connection to connect to a
remote site with added security.
52