Basic Setting > Wireless - LevelOne MobilSpot WBR-3800 User Manual

Basic Setting > Wireless
This page allows you to configure the wireless feature of the unit.
1. Wireless - Enabled by default. Disabling this will turn off the wireless feature of
this unit.
2. WMM Capable - Choose Enable or Disable WMM (WiFi Multimedia) function.
This function provides features that improves audio, video and voice applications
over the wireless network.
3. SSID - Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID's factory default setting is
WBR-3800. The SSID can be easily changed to establish a new wireless
network.
Note: SSID names may contain up to 32 ASCII characters.
4. Channel - Channels 1-13 are available to choose from, 11 is the default. Devices
on the network must share the same channel. Changing the channel may
improve signal quality.
Note:
Channel range depends on your regional regulations. Please see specifications for Channel details.
Wireless adapters automatically scan and match the wireless settings. You may also select the channel you
wish to use.
5. Security - You may select from three levels of encryption to secure your wireless
network: No Encryption, WEP.802.1x, WPAPSK, WPA, WPA2PSK, or WPA2.
a) No Encryption is the default (as shown in the screen above).
20