LevelOne MobilSpot WBR-3800 User Manual page 55

 Select View Available Wireless Networks in Wireless Configure. The Connect
to Wireless Network screen appears.
 Ensure you have selected the correct wireless network.
Ensure that the IP Address of the computer is in the same range and subnet as the
WBR-3800 MobilSpot™. The default IP Address of the WBR-3800 is 192.168.0.1.
All the computers on the local area network must have a unique IP Address within
the same range (e.g., 192.168.0.x). All computers must also have the same subnet
mask (e.g., 255.255.255.0). Any computers that have the identical IP Address will
not be visible on the network.
To check the IP Address assigned to the wireless adapter, follow the steps below:
 Click on Start > Run
 Type in cmd and press Enter.
 Enter ipconfig /all and press Enter
 Enter ping 192.168.0.1 to check if you can access the WBR-3800.
3. Why does my wireless connection keep dropping?
You may try following steps to solve.
 Antenna Orientation
Try different antenna orientations for the WBR-3800 MobilSpot™
Try to keep the antenna at least 6 inches away from the wall or other objects.
 Changing the Wireless Channel
Try changing the channel on the WBR-3800 to a different channel to avoid
interference. Please refer to Basic > Wireless section on page 21.
4. Why I am unable to achieve a wireless connection?
Note: An Ethernet connection is required to troubleshoot the WBR-3800 MobilSpot™.
 If you have enabled Encryption (WEP, WPA/WPA2) on the WBR-3800, you
must also enable encryption on all wireless clients in order to establish a
wireless connection. Please refer to your wireless adapter manual for more
information.
 Move the WBR-3800 and the wireless client into the same room, and then
test the wireless connection.
50