Responsibility Of The Manufacturer; Returning The Generator For Service; Step 1 - Obtain A Returned Goods Authorization Number; Step 2 - Clean The Generator - Bovie AARON 2250 Service Manual

RESPONSIBILITY OF THE MANUFACTURER

Aaron Medical is responsible for the safety, reliability, and performance of the generator only under the following
circumstances:
• The user has followed the Installation and Setup Procedures in this Service Guide.
• Persons authorized by Aaron Medical performed assembly operation, readjustments, modifications, or repairs.
• The electrical installation of the relevant room complies with local codes and regulatory requirements, such as
IEC and BSI.
• Equipment use is in accordance with the Aaron Medical instructions for use.
For warranty information, refer to Appendix A - Warranty.

RETURNING THE GENERATOR FOR SERVICE

Before you return the generator, call your Aaron Medical representative for assistance. If instructed to send the
generator to Aaron Medical, first obtain a Returned Goods Authorization Number. Then, clean the Generator
and ship it to Aaron Medical for service.
Step 1 – Obtain a Returned Goods Authorization Number
Call the Aaron Medical Customer Service Center to obtain a Returned Goods Authorization Number. Have the
following information ready when you call:
• Hospital / clinic name / customer number
• Telephone number
• Department / address, city, state, and zip code
• Model number & Serial number
• Description of the problem
• Type of repair to be done
Step 2 – Clean the Generator
WARNING:
Electric Shock Hazard - Always turn off and unplug the generator before cleaning.
NOTICE:
Do not clean the generator with abrasive cleaning or disinfectant compounds, solvents, or other
materials that could scratch the panels or damage the generator.
A. Turn off the generator, and unplug the power cord from the wall outlet.
B. Thoroughly wipe all surfaces of the generator and power cord with a mild cleaning solution or disinfectant and a
damp cloth. Follow the procedures approved by your institution or use a validated infection control procedure.
Do not allow fluids to enter the chassis. You cannot sterilize the generator.
Step 3 – Ship the Generator
A. Attach a tag to the generator that includes the Returned Goods Authorization Number and the information
(hospital, phone number, etc.) listed in Step 1 – Obtain a Returned Goods Authorization Number.
B. Be sure the generator is completely dry before you pack it for shipment. Package it in its original shipping
container, if available.
C. Ship the generator, prepaid, to the address given to you by the Aaron Medical Service Center.
8-2 Aaron Medical