Table of Contents
Advertisement
OPERATION
使用方法
(only for "Clean air and humidifying mode", "Clean air mode")
(Indicator lights on)
(指示灯亮起)
Air Volume
(只适用于加湿空气净化模式、空气净化模式。)
Select appropriate air volume for purifying air or
humidifying.
选择合适的风量净化空气或加湿。
The indicator will be changed sequentially as below each time the button is
pressed.
每按一下，指示灯将按下图顺序进行切换。
Automatically adjust the air volume according to the
air pollution and humidity detected by sensors, and
purify air or humidify by optimal air volume.
根据感应器检测的空气污染程度和湿度，自动调节风量，利用
最佳的风量净化空气或加湿。
Operate quietly in a low speed, and purify air or
humidify slowly.
低速安静地运转，但净化空气或加湿的速度相对减慢。
Purify air or humidify in a medium speed.
以中等速度净化空气或加湿。
Purify air or humidify quickly.
快速净化空气或加湿。
(Indicator lights on)
(指示灯亮起)
Econavi
Smart power-saving mode.
省电智能运转。
Press the button will operate in Econavi mode. Econavi is a smart
power-saving operation by combining the "patrol mode" with "learning
mode", and it adjusts the air volume automatically. (P.23)
按下按钮将以智慧节能模式进行运转。智慧节能是由"侦测模式"与"学习模式"组合
而成的省电智能运转模式，并能自动调节风量。(第23页)
Press the button again to cancel. (Indicator lights off)
(When "Clean Air" or "Clean/Humid." is set, Econavi can also be canceled
by pressing the
再次按下此按钮取消。(指示灯熄灭)
(当以"空气净化"或"加湿空气净化"模式运转时，可通过按
取消。)
风量
智慧节能
button.)
使
用
方
法
按钮进行
15
Advertisement
Table of Contents
