Table of Contents
Advertisement
o In case of power failure, the burners can be lit by carefully using
Turning the hob on (BG60TC and B60.1TCSS only)
o This particular appliance is fitted with a thermocouple safety
o To light a burner, press in and turn the appropriate control knob
o Whilst pressing in the control knob, press and hold down the
o The ignition spark will operate, you should hold down the ignition
o To regulate the flame, you should continue turning the control
o To turn the burner off, turn the control knob fully clockwise to
o In case of power failure, the burners can be lit by carefully using
Energy saving tips
o The diametre of the bottom of the pan should correspond to that
o The burner flame must never extend beyond the diametre of the
Get user manuals:
See SafeManuals.com
a match.
device on each burner, which is designed to stop the flow of gas
to the burner head in the event of the flame going out.
anti-clockwise to the large flame symbol.
ignition button, which is located on the control panel.
button for 20 seconds after the flame on the burner has lit.
knob anti-clockwise until the flame is at a suitable level. The
operating position MUST be at a position between the maximum
and minimum position.
the gas off position.
a match.
of the burner.
pan.
11
Advertisement
Table of Contents
