Microlife FR1DQ1-B User Manual page 9

Press the START/IO button
1.
A flashing «°C»/«°F» icon, the blinking blue tracking light
2.
○
a measurement 10 .
Press the MODE button
3.
Remove any hair, sweat or dirt from the forehead before measuring to ensure the accuracy of the readings.
4.
3S body mode: Aiming the thermometer at the center of the forehead with a distance no more than 5 cm. Once
5.
the display shows "good", when the measuring sensor
press the START/IO button and slowly scanning from forehead to temple, a long beep will verify the completion of
measurement.
1S body mode: Aiming the thermometer at the center of the forehead with a distance no more than 5 cm. Once
6.
the display shows "good", when the measuring sensor
press the START/IO button, a long beep will verify the completion of measurement.
Read the recorded temperature from the LCD display.
7.
For the next measurement remove the thermometer from the forehead and wait until the «°C»/«°F» icon is flashing.
8.
Follow steps 4-5 above.
Press and hold the START/IO button
9.
device totally; otherwise, the device will automatically switch off after approx. 30seconds
Measuring in object mode without auto measurement
1. Press the START/IO button
2. Press the MODE button
3. A flashing «°C»/«°F» icon, the blinking blue tracking light
○
measurement 9 .
4. Aim the thermometer at the center of the object you want to measure with a distance no more than 5 cm. Press
the START/IO button
5. Read the recorded temperature from the LCD display.
6. For the next measurement wait until the «°C»/«°F» icon is flashing and follow steps 4-5 above.
7. Press and hold the START/IO button

○
○
4 . The display 3 is activated to show all segments for 1second.
○
6 to switch between 3S and 1S body mode.
○
4 for 3seconds to enter stand by ambient mode or 6 seconds to turn off the
○ ○
4 . The display 3 is activated to show all segments for 1second.
○
6 to switch to object mode.
○
4 . After 1seconds a long beep will verify the completion of measurement.
○
4 for 3seconds to turn off the device totally, otherwise the device will
○
2 and a beep indicate that the device is ready to take
○
1 detects the distance is appropriate within 5 cm. Then
○
1 detects the distance is appropriate within 5 cm. Then
○
2 and a beep indicate that the device is ready for