Related Manuals for Microlife FR1MF1
Summary of Contents for Microlife FR1MF1
- Page 1 Microlife AG Espenstrasse 139 9443 Widnau - Switzerland www.microlife.com IB FR1MF1 EN 2113...
- Page 2 Microlife NON CONTACT - FR1MF1 sec. sec. FR1MF1...
- Page 3 Microlife FR1MF1 Read the instructions carefully before using this device...
- Page 4 Microlife FR1MF1...
- Page 5 Microlife FR1MF1 1 Measuring Sensor AP Changing between Celsius and Fahrenheit 2 Tracking light AQ Recall Mode 3 Display AR Recall the last 30 Readings 4 Start Button AS Measured Temperature too high 5 ON/OFF Button BT Measured Temperature too low...
- Page 6 This Microlife Thermometer is a high quality product incorporating Read the instructions the latest technology and tested in accordance with international carefully before using this device. standards. With its unique technology, this thermometer can provide a stable, heat-interference-free reading with each measurement. The...
-
Page 7: Table Of Contents
• Surface temperature of a baby’s bath 12. Battery Replacement • Ambient temperature 13. Guarantee Accurate and reliable 14. Technical Specifications The unique probe assembly construction, incorporates an 15. www.microlife.com advanced infrared sensor, ensuring that each measurement is Guarantee Card (see Back Cover) accurate and reliable. -
Page 8: Important Safety Instructions
The • Cleaning of the sensor can be done with an alcohol-moistened recorded temperature using this thermometer can, therefore,be cotton tissue. unusually low. Fever Alarm • If the measurement result is not consistent with the patient’s FR1MF1... -
Page 9: How This Thermometer Measures Temperature
finding or unusually low, repeat the measurement every WARNING: Use of this instrument is not intended as 15 minutes or double check the result by another core body a substitute for consultation with your physician This temperature measurement. instrument is NOT waterproof so do not immerse in •... -
Page 10: Set Date, Time And Beeper Functions
5 for 5 seconds to set the beeper BQ. Press the ON/ • Press the START button 4 to set the month. Press the M OFF button5to turn the beeper on and off. The thermometer button 8 to confirm and then set the day. FR1MF1... -
Page 11: Changing Between Body And Object Mode
distance of no more than 5 cm. Please remove any hair, will indicate whether the beeper is activated by displaying a beeper icon on the screen. sweat or dirt from your forehead before measuring to improve If no button is pressed for 5 seconds, the device automatically the accuracy of the readings. - Page 12 3. If the measurement is surprisingly low. °C. • Readings from different measuring sites should not be • Always take the temperature in the same location, since compared as the normal body temperature varies by temperature readings may vary according to location. FR1MF1...
-
Page 13: Changing Between Celsius And Fahrenheit
− Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 ° • Recall mode AR : Press the «M» button8to enter Recall mode − Microlife NC 150: 35.4 - 37.4 °C / 95.7 - 99.3°F when the power is off. The memory icon «M» will flash. -
Page 14: Error Messages
Replace the batteries BR – ensure correct polarity as shown by • Flat battery indication BO : If this icon « »is the only the symbols in the compartment. symbol shown on the display, the batteries should be replaced FR1MF1... -
Page 15: Guarantee
Type: Batteries and electronic instruments must be disposed Non Contact Thermometer FR1MF1 Measurement of in accordance with the locally applicable regulations, not Body Mode: 34.0-42.2 °C (93.2-108.0 °F) range: with domestic waste. Object Mode: 0-100.0 °C (32-212.0 °F) Resolution: 0.1 °C / °F Measurement 13. -
Page 16: Www.microlife.com
-20 °C to 50 °C (-4 °F to 122 °F) Detailed user information about our thermometers and blood pressure Automatic 15-95 % relative maximum humidity monitors as well as services can be found at www.microlife.com. Switch-off: Approx. 1 minute after last measurement FR1MF1... - Page 17 FR1MF1 Guarantee Card Name of Purchaser Serial Number Date of Purchase Specialist Dealer...
- Page 18 FR1MF1...
Need help?
Do you have a question about the FR1MF1 and is the answer not in the manual?
Questions and answers