Table of Contents
Advertisement
Assembly Guide
This guide assumes you are familiar with assembling circuit boards, soldering and
cleaning. If not, it is recommended you read some of the guides on the internet
before continuing.
First check you have all the required components, as listed in the section "What You
Need". Header pins JP1 and JP2, and P1 to P4 may need to be cut from longer strips.
Step 1
Fit and solder IC sockets for U1, U2 and U3.
Be sure to fit them with the notch matching the legend on the circuit board, so you
do not end up fitting the IC the wrong way round too.
15
Advertisement
Table of Contents
