Removal Of Outdoor Fan / Fan Motor - Daikin R24LV2S Service Manual Removal Procedure

Si011196

2. Removal of Outdoor Fan / Fan Motor

Procedure
Step
1 Disconnect the relay
connector for the fan
motor.
2 Unfasten the hook with
a flat screwdriver.
3 Release the fan motor
lead wire from the
partition plate.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Removal of Outdoor Fan / Fan Motor
Preparation
Remove the front panel
according to the "Removal of
Outer Panels".
(R16366)
Hook
Put the fan motor lead wire
(R5436) through the back of the fan
motor when reassembling so
as not to be entangled with
Partition plate
the outdoor fan.
Lead wire
(R12812)
Points
Outdoor fan
(R3249)
5