MacDon FlexDraper FD1 Series Operator's Manual page 433

Tine Tube Bushings (If Installed)
16. Locate the support (A) that requires a new bushing.
17. Remove the four bolts (B) securing channels (C) to the
support (A).
18. Remove screw (E) and remove the finger (D) if it is too
close to the support to allow access to the bushing.
Refer to
Removing Plastic Fingers, page
19. Release the bushing clamps (A) using a small
screwdriver to separate the serrations.
clamps off the bushings.
147831
MAINTENANCE AND SERVICING
410.
Move the
415
Figure 5.225: Tine Tube Support
Figure 5.226: Bushing Clamp
Figure 5.227: Bushing Clamp
Revision A