SAESHIN Traus SIP10 Instruction Manual page 5

WARNING
· Please watch old person, children, or disabled person near the place that the product is installed.
If so, do not let them alone.
· Do not drop or damage the handpiece. In case of malfunction, dropping, or dropping in water, do not
use it and contact the manufacturer.
(It may cause vibration of bur, overheating, or damage of the bearings.)
· The equipment is automatically stopped when the machine load is higher than Torque value.
· Do not damage or drop the LCD part of the control box.
PROHIBITION
· Do not use damaged or broken power cord, plug, and outlet. It may cause fire and electric shock.
· When unplug the power cord, hold the plug and do not touch with wet hand.
Do not use loose power cord, it may cause electric shock and fire.
· Do not damage to power cord (do not bend too hard, do not put heavy objects on it). It may cause
electric shock and fire.
· Unauthorized modification and dismantling is prohibited.
· Do not use the solvent such as thinner or benzene for cleaning.
※ Be careful not to drop liquid on control box.
※ Do not wipe the control box (membrane) with wet fabric.
· Do not place the product near heat equipment, and do not put candles or cigarette on it.
· Please use a grounded plug. Contact to electrician or manufacturer to ask how to grounding.
· Be sure to use designated bur by ISO 1797.
· Follow the instruction manual by manufacturer of bur to use bur.
· Keep the recommended speed limit by manufacturer of bur to use bur. If exceed the speed limit,
it might cause an accident.
· The product must be used by specialist or expert. If not, patient might get burn or damage by
improper use.
· Do not use the product to patient with cardiac pacemaker because the product may disturb the
performance of cardiac pacemaker.
· If patient is taking antibiotics, patient needs to consult with doctor before operation.
· Keep away from fire or heat when using spray containing flammable material.
· Manufacturer does not have any responsibility for defects or loss of property in cases below.
1. User did not follow the instruction manual to use the product.
2. Used the product in the place of unregulated wire condition.
3. Unauthorized person repaired or assembled the product.
4. Did not follow the instruction manual to keep the product.
6