Ready Stacks; Firmware Mismatch - Nuvation Energy S801 Product Manual

9.1.3. Ready Stacks

This fault represents a configurable minimum limit of how many stacks must be ready and still have
the pack remain
support@nuvationenergy.com
pack_fault_ready_stacks
▪
Fault indicating that the minimum number of ready stacks for the pack has not been satisfied
Refer the Stack Status page
been either disabled, are in Service Lockout, or have faulted.

9.1.4. Firmware Mismatch

gbc_fault_fw_mismatch
▪
Fault indicating that the difference between the Multi-Stack Controller and the expected stack-
level BMS firmware versions. Perform a firmware upgrade on the affected stacks.
To determine which stacks have this particular fault, refer the component gbc_fw_mismatch[*].mismatch.
Document ID: NE-PM-004
connected and manage
for details of this operation and configuration.
(Section 5.4) on the Operator Interface to observe which stacks have
Nuvation Energy Multi-Stack Controller - Product Manual
the battery
62
power. Please contact
Rev 2.0, 2022-05-18
Curie Update 3