Table of Contents
Advertisement
"Time","Field","Average","Minimum","Maximum"
2020-10-02 13:47:00,Available Capacity (kWh),0,0,0
2020-10-02 13:47:00,Capacity (Ah),0,0,0
2020-10-02 13:47:00,Capacity (kWh),0,0,0
2020-10-02 13:47:00,Cell Temperature Average (C),21,21,21
2020-10-02 13:47:00,Cell Voltage Average (V),386,386,386
5.6.5. Locking and Unlocking
The Operator Interface can be locked to prevent accidental or unintentional changes that could have
serious impacts on the system. To further secure the system, a password can be set to ensure only
authorized individuals can access these critical sections of the Operator Interface
When the Operator Interface is unlocked, the lock indicator will be replaced with an unlocked
indicator.
5.6.5.1. Lock the Operator Interface
To lock the Operator Interface, simply click the Unlocked indicator or bring up the settings menu and
select Lock.
To prevent accidental changes to your Nuvation Energy BMS, always lock the
Operator Interface after making your changes.
It is possible to require a password to unlock the Operator Interface.
5.6.5.2. Unlock the Operator Interface
To Unlock the Operator Interface, simply click the Locked indicator or bring up the settings menu and
select Unlock. If a password has been set, the correct password will need to be entered to complete
the unlocking process.
Document ID: NE-PM-004
Figure 23. Operator Interface Locked indicator
Figure 24. Operator Interface Unlocked indicator
Nuvation Energy Multi-Stack Controller - Product Manual
42
Rev 2.0, 2022-05-18
Curie Update 3
Advertisement
Table of Contents
