Status Leds - Nuvation Energy S801 Product Manual

4.3.2. Status LEDs

When the Multi-Stack Controller is powered up, its status LEDs provide indication of the functional
status of the module and its interfaces. The Operator Interface provides additional information.
The Power LED indicates the status of the Multi-Stack Controller.
LED Colour
Power LED Solid
Solid
Solid
Flashing
The Port LEDs indicate the status and speed of each interface.
LED
LAN1 - LAN4 Activity (A1 - A4)
LAN1 - LAN4 Link (L1 - L4)
Document ID: NE-PM-004
Figure 9. Multi-Stack Controller Power LED
Table 3. Power LED Description
Status
Blue Multi-Stack Controller State: Operational
Teal Multi-Stack Controller State: Reading/Writing to the Internal Storage Media
Red Multi-Stack Controller State: Overheating or Critical Hardware Fault.
Red Multi-Stack Controller State: Hardware Fault
Figure 10. Multi-Stack Controller Port LEDs
Table 4. Port LEDs Description
Colour
Flashing
Solid Green
Solid Orange
Nuvation Energy Multi-Stack Controller - Product Manual
Status
Orange LAN# State: Active
LAN# Speed: 10/100 Mbps
LAN# Speed: 1000 Mbps
15 Rev 2.0, 2022-05-18
Curie Update 3