Nuvation Energy Multi-Stack Controller - Product Manual
5.3.8. Cell Voltage
The cell voltage bar gauge shows the maximum, minimum, and average cell voltage measurements
within the pack. Only data from enabled stacks is aggregated.
The high cell voltage and low cell voltage warning and fault threshold is visualized on the gauge with
yellow and red segments. The blue segment depicts the acceptable cell voltage range.
If a triangle enters the yellow segment, a warning has occurred. If a triangle enters the red segment,
a fault has occurred.
The maximum and minimum cell location in the pack and their voltage values are shown below the
gauge, along with the average cell voltage value.
Document ID: NE-PM-004
24
Rev 2.0, 2022-05-18
Curie Update 3