Table of Contents
Advertisement
Nuvation Energy Multi-Stack Controller - Product Manual
5.2. The Status Banner
The banner at the top of the screen is used to indicate high level changes in system status. During
typical operation nothing is displayed and this indicates the Multi-Stack Operator Interface is
communicating with the BMS and the BMS is fully operational with no major diagnostics problems.
5.2.1. Communication Loss
When the Multi-Stack Operator Interface can no longer communicate with the battery management
system, a communication lost banner is displayed at the top of the display. It will provide the amount
of time since disconnected and updates each second.
Figure 11. Multi-Stack Operator Interface Communication lost indicator
Document ID: NE-PM-004
19
Rev 2.0, 2022-05-18
Curie Update 3
Advertisement
Table of Contents
