Table of Contents
Advertisement
5.6.2.1. Importing a Configuration File
This is a restricted option requiring the Operator Interface to be unlocked to access
this option.
This menu option allows you to import a configuration file.
Please contact
support@nuvationenergy.com
5.6.2.2. Exporting a Configuration File
Nuvation Energy BMS does not preserve the originally imported configuration file
with comments and formatting. The export feature will export a configuration file
with an alphabetical listing of all registers and their set values.
To export your configuration file:
1. From the menu, select Service
2. Click Export Configuration
5.6.3. Connection
The connection screen allows you to change the IP address and timeout of the Nuvation Energy BMS
that you are trying to access.
If the Operator Interface loads properly but fails to establish a connection, try
increasing the timeout value.
This connection screen must not be used for changing the IP address. You may only
use this screen to change the timeout.
5.6.4. Logging
Log data can be viewed and downloaded at the URL http://ncontroller-<serial_number>.local/log. This
URL can be accessed via a
Controller serial number - this can be found on a label on the exterior of the product.
Data will be automatically logged and aggregated for each minute into "Minimum", "Maximum", and
"Average" values over each minute interval. All logged data is numeric, including boolean values,
which are represented as 'true = 1' and 'false = 0'.
This section highlights the key aspects of the local logging feature on the device. An example of the
log view and download screen is below.
Document ID: NE-PM-004
Nuvation Energy Multi-Stack Controller - Product Manual
for more instructions on generating configuration files.
computer. Replace <serial number> with the Multi-Stack
compatible
37
Rev 2.0, 2022-05-18
Curie Update 3
Advertisement
Table of Contents
