Settings; Upgrading The Multi-Stack Controller - Nuvation Energy S801 Product Manual

6.5. Settings

The settings page is responsible for the following:
▪

Upgrading the Multi-Stack Controller

▪
Factory Resetting the Multi-Stack Controller
▪
Rebooting and Powering off the Multi-Stack Controller
▪
Setting Date, Time, and Timezone
Figure 30. Nuvation Energy Platform Interface Settings
6.5.1. Upgrading the Multi-Stack Controller
It is highly recommended to only upgrade software under guidance from Nuvation

Energy. Incorrectly upgrading software could render the Multi-Stack Controller
inoperable.
To upgrade the Multi-Stack Controller, click the "Choose File" button to select a file with an extension
of .nup or .nosp. Then, click "Upgrade" to upgrade the unit.

It is always recommended to create a backup before upgrading.
The upgrade process may take a couple minutes, so please wait for the upgrade

process to complete. The page will automatically refresh once the upgrade is
complete.
Downgrading the Multi-Stack Controller is not an accessible feature. To revert to a

previous
support@nuvationenergy.com
Document ID: NE-PM-004
version, please use
for assistance with downgrading.
Nuvation Energy Multi-Stack Controller - Product Manual
the backup/restore
50
feature. Please contact
Rev 2.0, 2022-05-18
Curie Update 3