Aerial GTWY Series Operator's Manual page 6

Explosion and Fire Hazard
Do not operate the machine or
charge the battery in hazardous
locations or locations where
potentially flammable or explosive
gases or particles may be present.
Damaged Machine Hazards
Do not use a damaged or malfunctioning
machine.
Be sure all maintenance has been
performed as specified in this manual and
the GTWY Series service manual.
Be sure all decals are in place and legible.
Be sure the operator's manuals are
complete, legible and in the storage
container located on the platform.
Conduct a thorough pre-operation
inspection of the machine and test all
functions before each work shift.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Do not use the machine as a ground for
welding.
Charger Safety-DC
Burn Hazards
Batteries contain acid.
Always wear protective clothing and eye wear
when working with batteries.
The battery pack must remain in an upright
position.
Avoid spilling or contacting battery acid.
Neutralize battery acid spills with baking soda
and water.
Explosion Hazards
Batteries emit explosive gas. Keep sparks,
flames and lighted tobacco away from the
battery.
Charge the battery in a well ventilated area.
Do not disconnect charger DC output wires
from the battery when the charger is on.
GTWY SERIES 4
Operator's Manual