Safety Rules - Aerial GTWY Series Operator's Manual

Danger
Failure to obey the instructions and
safety rules in this manual will
cause death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
防
machine operation contained in this operator's
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation
inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer's instructions and safety
rules— safety and operator's manuals and
machine decals.
You read, understand and obey employer's
safety rules and worksite regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Keep away from the machine if it contacts
energized power lines or becomes electrically
charged. Personnel on the ground or in the
platform must not touch or operate the machine
until energized power lines are shut off.
Maintain safe distances from electrical power
lines and apparatus in accordance with
applicable governmental regulations and the
following chart.
Minimum Safe Voltage Approach Distance
0
Phase to Phase
0 to
300V to
50KV to
200KV to
350KV to
500KV to
750KV to
Allow for platform movement, electrical line
sway or sag and movement due to strong or
gusty winds.
Do not use the machine as a ground for welding.
GTWY SERIES 1
Operator's Manual

Safety Rules

Feet
300V Avoid Contact
50KV 10
200KV 15
350KV 20
500KV 25
750KV 35
1000KV 45
Meters
3.05
4.60
6.10
7.62
10.67
13.72