Workplace Inspection - Aerial GTWY Series Operator's Manual

Workplace Inspection

Be aware of and avoid the following hazardous
situations:
● Drop-offs or holes
● Bumps, floor obstructions or debris
● Slopes that exceed the machine's leveling
capability：5%
● Unstable or slippery surfaces
● Overhead obstructions and high voltage
conductors
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator's
manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation inspection. 3
Always perform function tests prior to use. 4
Inspect the workplace.
5 There must be at least 1 safety supervisor
next to the machine when it works,to supervise
the operation and make sure no hazard to the
machine and operator.
6 Only use the machine as it was intended.
Fundamentals
The Operating Instructions section provides
Workplace Inspection
● Hazardous locations
● Inadequate surface support to withstand
all load forces imposed by the machine
● Wind and weather conditions
● The presence of unauthorized personnel
● Other possible unsafe conditions
instructions for each aspect of machine
operation. It is the operator's
responsibility to follow all the safety rules
and instructions in the operator's, safety
and responsibilities manuals.
Using the machine for anything other than
lifting personnel, along with their tools and
materials, to an aerial work site is unsafe
and dangerous.
If more than one operator is expected to
use a machine at different times in the
same work shift, each operator is expected
to follow all safety rules and instructions in
the operator's manual. That means every
new operator should perform a
pre-operation inspection, function tests
and a work place inspection
before using the machine.
Never operate the machine without enough
light.
GTWY SERIES 12
Operator's Manual