Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Aerial Manuals
  4. Boating Equipment
  5. Ascent 2.0
  6. Installation manual

Aerial Ascent 2.0 Installation Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
ascent WaKeBoaRd toWeR
installation guide
installation suPPoRt
1
GUIDE#: BT-ascEnT-001

Advertisement

loading

Related Manuals for Aerial Ascent 2.0

Summary of Contents for Aerial Ascent 2.0

  • Page 1 ascent WaKeBoaRd toWeR installation guide installation suPPoRt GUIDE#: BT-ascEnT-001...
  • Page 2 ALWAYS inspect this product for loose bolts, fittings or damage before each use. • Always carefully CONSULT the user manual for proper installation, maintenance and usage. • AERIAL WAKEBOARDING is not liable for personal injury or property damage from the use of this or any other Aerial product. GUIDE#: BT-ascEnT-001...
  • Page 3 toWeR Fittings and HaRdWaRe (4 pcs) (6 pcs) (6 pcs) (4 pcs) (6 pcs) (2 pcs) (2 PieceS AlreAdy (4 pcs) inSTAlled on reAr legS) (4 pcs) (4 pcs) (4 pcs) toWeR PaRts Top cross Bar (1 pcs) fronT lEG Bars (2 pIEcEs) rEar lEG Bars (2 pIEcEs) GUIDE#: BT-ascEnT-001...
  • Page 4 steP 1 With masking tape, cover the area where the mounting brackets will be placed. This should be done at all points where the tower will make contact with the deck as well as the surrounding area. This will help to eliminate scratches to your boat while adjusting and measuring your tower attachment points.
  • Page 5 steP 4 After confirming (double check) that your measurements are cor- rect, secure all three bars and the tow bar in the correct position. To do this you will need to drill (using a 5/8” drill bit) 4 holes through the two vertical bent bars aligned with the pre-drilled holes in the top cross bar.
  • Page 6 STEP 7 remove the tower from the boat and drill the holes with your 5/8” drill bit. after your holes have been drilled, remove the masking tape from the rear mount location. Then place the tower back on the location with a rubber steP 8 mounting plate between the tower mount and the deck surface.

  • Page 7: Care And Maintenance

    STEP 10 - FOLDING ThE TOWER loWEr ThE fronT anD rEar lEGs rEMovE fasTEnErs ToWarDs ThE sTErn of ThE BoaT froM BoTh sIDEs of ThE ToWEr. MoUnTs WIll roTaTE slIGhTly To fold the tower we recommend removing the 2 fasteners that connect the top of each rear leg to the front legs.