Table of Contents
Advertisement
C
F
: Tutorials
4.10
H A P T E R
O U R
Hint
Pressing the F5 key will bring up the last plug-in interface used. In this case HyperVoxels. If a panel is open, click on the main Layout interface
first.
You should see your gas planet is taking shape!
12.
Increase the Gain setting slowly and watch the center of your gas planet become more solid in the 2D preview window on the right. Bring the
value all the way up to 99 for a nice solid center.
13.
Now slowly increase the Bias control and watch the preview swatch as the gaseous edges grow! Once you have raised this value to 99 make
another preview refresh. OK, time to adjust particle size.
14.
Set the Preview option back to Object and refresh the Preview.
The effect is quite small. All we need to do is turn up Particle Size.
15.
Try a value somewhere near 2.0 and refresh Preview again.
OK! Pretty cool, but it could be a little hotter on this fireball planet (Unless you live in San Antonio.) We will do this by
adjusting the Luminosity gradient.
16.
Click on the P button to the right of the Luminosity setting.
Advertisement
Table of Contents
Need help?
Do you have a question about the HyperVoxels 2.0 and is the answer not in the manual?
Questions and answers