Network Menu; Settings Menu; Presets Menu; Version Menu - MOTU 1248 User Manual

Network menu

The Network menu displays the following
network-related information:
Setting Explanation
Serial/UID Unique AVB network identifier and serial
number that can be used for trouble-
shooting and registering your device at
motu.com/register.
IP address The unique network address for the unit.
Type this address into your web browser
to access the unit's settings in the MOTU
Pro Audio Control web app.
AVB Indicates whether AVB networking is
currently enabled or disabled. For exam-
ple, AVB could be disabled because a
non-AVB switch is being used. When
AVB is disabled, audio streaming over
the network is disabled.

Settings menu

The Settings menu provides access to basic
hardware settings, such as Clock Mode, Sample
Rate, and so on.
Setting What it does
Clock Mode Sets the digital audio clock source for the
device.
Sample Rate Sets the sample rate for the device.
Word Clock Thru Sets the word clock output to OUT or
THRU
Optical Specifies the SMUX format when operat-
ing at 88.2 or 96 kHz. See "Optical" on
page 52.
Configure IP Chooses between DHCP and a manually
assigned IP Address.
LCD Contrast Adjusts the contrast of the LCD.
Clear Password Removes password protection in the web
app.
Factory Defaults Restores factory default settings.

Presets menu

The Presets menu lets you recall settings that have
been saved as a device preset. Use the web app to
create and save presets (item #8 in the "Device tab"
on page 18).
T H E F R O N T P A N E L L C D

Version menu

The Version menu displays firmware version
information.

CLOCK

The Clock section of the LCD displays the sample
rate at which the unit is currently operating, and
the current Clock Mode setting (item #14 in the
Devices tab on page 18). The Clock Mode setting
can also be found (and changed) in the Settings
Menu.

STAND-ALONE OPERATION

All settings, including mix settings and device
settings, are saved in your MOTU interface's
memory. They remain in effect even when the
interface is not connected to a computer. This
allows you to use your MOTU device as a stand-
alone mixer. You can make adjustments to any
setting at any time from the web app running on a
device that has a network connection to your
MOTU interface, as explained in "Setup for web
app control" on page 47.
71