Mirroring computer channels to multiple
outputs
Figure 7-6 shows an example of mirroring one
stereo audio stream from your host audio software
to several outputs. In the example, computer
channels 1-2 are being sent to the main outs, plus
phones 1-2 and phones 3-4. To route an input to
multiple outputs, click multiple boxes in its
column, (see computer channels 1-2 in Figure 7-6).
Figure 7-7: An example of routing physical inputs on the 1248 to computer channels (for host audio software). In this example, S/PDIF
input is on channels 23-24 going to the computer, and 24 channels total are being used for streaming to the host computer, but more can
be added for other inputs from the mixer or AVB network, if any.
W O R K I N G W I T H H O S T A U D I O S O F T W A R E
Combining multiple inputs to one output
To merge (mix) any channels in the grid (computer
streams or otherwise), route them to mixer inputs
and then use the on-board mixer ("Mixing tab" on
page 22).
Routing grid tutorials
For further info about using the routing grid,
including many useful tips and techniques, visit:
www.motu.com/techsupport/technotes/avbrouting
and
www.motu.com/proaudio
79