MOTU 1248 User Manual page 29

TOUCH CONSOLE CHANNEL SETTINGS
1
11
10
Touch any channel setting (items 8, 9
or 10 on page 28) to access the
channel tab shown above.
1. The channel tab provides touch-
friendly control over every
parameter on every channel.
2. The Settings tab (13) provides
basic channel settings for inputs
(items 2 through 5 on page 24)
and busses (items 3 through 6 on
page 25).
3. The Equalizer tab (shown)
displays a touch-friendly, resiz-
able EQ graph with controls,
similar to those shown in
Figure 8-3 on page 83. Tap the
desired band across the bottom
(11) and adjust its controls to the
right (8) or simply drag its control
point (12). Use two fingers to
graphically adjust bandwidth for
parametric bands.
4. The Dynamics tab (14) displays
touch-friendly controls for the
channel's dynamics processing,
as explained in "Gate" on
page 82, "Compressor" on
page 83 and "Leveler" on
page 85.
M O T U P R O A U D I O C O N T R O L W E B A P P
2 3
12
5. The Sends tab (15) displays long-
throw faders for all of the
channel's available sends, includ-
ing aux sends, group sends, the
reverb send and the send to the
main bus.
6. The channel name.
7. Tap the X to close the tab.
8. Settings for the currently
selected EQ band (11).
9. Drag this handle to resize the tab.
10. While the channel settings tab is
open, tap any channel to jump to
it.
11. EQ bands.
12. A dragable EQ band control
point. Use two fingers to adjust
its bandwidth.
13. Channel settings tab.
14. Dynamics tab.
15. Sends tab.
4 5
13
14
15
6
7
8
9
29