Installation Instructions; Accessories - Sharp R-15AT Operation Manual

3. Do not use metal utensils, which refl ect microwaves
and may cause electrical arcing. Do not put cans
in the oven.
4. Do not place anything on the outer cabinet during
operation.
5. Do not use the oven near a steamer or a fryer.
NOTE
1. If you are unsure how to connect your oven, please
consult an authorized qualifi ed electrician.

INSTALLATION INSTRUCTIONS

WARNING: Always keep the caution sheet (SPECIAL INSTRUCTIONS AND WARNINGS) close to the oven for
your reference.
1) Remove all packing materials from the inside of
the oven cavity. Remove all the blue protective fi lm
from the outside of the oven.
2) Check the oven carefully for any signs of damage.
3) Place the oven on a fl at, level surface strong enough
to support the oven's weight plus the heaviest item
likely to be cooked.
Do not place this oven in a position which is not
easily accessible. To position the oven too high can
be dangerous because food can not be removed
safely.
4) Ensure there is a minimum free space above the
oven of 15 cm.

ACCESSORIES

Check to make sure the following accessories are provided:
Manuals and others
• Operation manual
• Menu sticker
Enter cooking times or dish names in this sticker and attach to the control panel.
• Caution sheet (SPECIAL INSTRUCTIONS AND WARNINGS: part code TCAUHA429WRRZ
and TCAUHA445WRRZ)
NOTE:
• When you order accessories, please mention the two items: part name and model name to your dealer or
SHARP authorized service agent.
• The model name is printed on the cover of this operation manual.
2. Neither the manufacuture nor the dealer can accept
3. Water vapour or drops may occasionally form on
5) Securely connect the plug of the oven to a standard
6) The unit may be secured to a countertop or stand.
15 cm
7) This oven is not intended to stack one on top of
GB-6
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
the oven walls or around the door seals and sealing
surfaces. This is a normal occurrence and is not an
indication of microwave leakage or a malfunction.
earthed (grounded) household electrical outlet.
There is a screw hole in the bottom of the unit. After
the oven is permanently placed, drill a hole through
the counter top for a 5 mm self-tapping screw. The
hole should be 20 mm from the left side of the outer
case cabinet and 180 mm back from the front edge
of the cavity face plate.
180 mm
20 mm
another.
Hole Hole