Sharp R-15AT Operation Manual page 13

MEMORY CHECK
You can check the information programmed into the memory.
Checking time and power level
Example: If you want to know the information programmed into the memory 1, memory 1 has been programmed
for 4 minutes on 60% for the 1st sequence and 2 minutes on 30% for the 2nd sequence.
Step Procedure
1 Press the CHECK key.
2
Press the NUMBER key
P = Power
Note: 1. To cancel MEMORY CHECK, press the CHECK key
2. When
3. To check the time constant for double quantity, press the DOUBLE QUANTITY key
desired NUMBER key in step 2.
.
is displayed after pressing the NUMBER key, the memory is not set.
Key Order
NO. will fl ash on and off.
.
GB-12
Display
NO. CHECK
NO. CHECK
After about 1 sec.
CHECK
CHECK
CHECK
CHECK
REPEAT
REPEAT
and the