Kiosk workstation user's guide
www.renishaw.com
Installation variants
The kiosk must be restrained from toppling.
The preferred option is to use floor mounting fixings to secure the kiosk to the floor. The kick plates supplied in the kiosk kit should be
secured to the floor. Pull force on floor fixing must be a minimum of 1 KN.
If kiosk cannot be fixed to the floor using kick plates then the suitable restraints should be used to remove the risk of the kiosk toppling.
Kick plate installation overview
1. Fix the two side plates to the floor using anchors.
2. Roll the kiosk into position between the side kick plates.
Issued 10 2022
11