Trouble Shooting - DT SWISS 240 OVERSIZE Technical Manual

4. TROUBLE SHOOTING

Issue
Hub has axial play
Hub rotates stiffly
Hub makes noise
Reason
Ball bearings were not mounted
correctly.
Ball bearings are worn out.
Ball bearings are worn out.
Ball bearing non-drive side driven
in too tight.
Mounting sequence of the ball
bearings not observed.
Ball bearings are worn out.
240 Oversize [screwed end caps]
Solution
Check correct assembly.
Replace ball bearings.
Replace ball bearings.
Check correct assembly.
Replace ball bearings.
13