Table of Contents
Advertisement
Industrial Redundant Ring Switch – RS Series User Manual
DIN-Rail Mounting Installation
With ICPDAS patent DIN-Clip
Following 3 steps completes installation.
➊
Up Clip
Down Clip
Push &
Clip
➋
➌
design, DIN-Rail mounting installation becomes very easy.
®
Pull the down rail clip out.
Obliquing the switch and insert the upper rail clips onto the upper lip of the
DIN-rail track. Then push down the switch to fit into DIN rail as shown below.
Push up down rail clip to lock the switch on the DIN rail.
TDRS4050601
18
Advertisement
Table of Contents
