Industrial Redundant Ring Switch – RS Series User Manual
Example:
mac,seteid
Description
Example:
netid [id number]
Description
Parameters
Example:
m
If no MAC address is specified, the "mac" or "seteid" command will display current
MAC address. To assign a MAC address for Ethernet, please input MAC address in
the form of "e1:e2:e3:e4:e5:e6".
Note: Each RS is shipped from the factory with a unique MAC address. DO NOT
change this address unless you have a good reason to do so. If you do change the
address, remember to make a note of this factory-set MAC address and keep it in a
safe place.
If Net ID of Modbus is not specified, the "netid" command will display current ID
number of Modbus. The command parameter [id number] is used to assign a
specific ID number for Modbus Net ID.
Parameter
Description
id number
Provides the ID number that you want to set up for
Modbus Net ID.
TDRS4050601