ICPDAS RS Series User Manual page 49

Industrial Redundant Ring Switch – RS Series User Manual
ip,setip
Description
Example:
mask,setmask
Description
Example:
gateway,setgateway
Description
If no IP address is specified, the "ip" or "setip" command will display current IP
address. To assign an IP address for TCP/IP, please input IP address in the form of
"ip1.ip2.ip3.ip4"(each field contains a value in the range 0 – 255).
If no mask address is specified, the "mask" or "setmask" command will display
current mask address. To assign a mask address for TCP/IP, please input mask
address in the form of "m1.m2.m3.m4"(each field contains a value in the range 0 –
255).
If no gateway IP address is specified, the "gateway" or "setgateway" command will
display current gateway address. Note that if there exits a check sum error, an error
message will alert. To assign a gateway address for TCP/IP, please input gateway
IP address in the form of "ip1.ip2.ip3.ip4" (each field contains a value in the range
0 – 255).
TDRS4050601
l