Industrial Redundant Ring Switch – RS Series Quick Start
DIN-Rail Mounting Installation
With ICPDAS patent DIN-Clip
Following 3 steps completes installation.
➊
Up Clip
Down Clip
➋
Push &
Clip
➌
6
®
design, DIN-Rail mounting installation becomes very easy.
Pull the down rail clip out.
Obliquing the switch and insert the upper rail clips onto the upper lip of the
DIN-rail track. Then push down the switch to fit into DIN rail as shown below.
Push up down rail clip to lock the switch on the DIN rail.
TDRS0602