ICPDAS RS Series User Manual page 43

Industrial Redundant Ring Switch – RS Series User Manual
Models
Technology
Standards
Processing Type
MAC Addresses
Memory Bandwidth
Flow Control
Redundant strategy
Protocol
Interface
RJ-45 Ports
Fiber Optics Port
LED Indicators
Ethernet Isolation
Frame Ground for EMS Protection Yes
Ethernet Transmission distance
Multi Mode Fiber
Cables
Distance
Wavelength
Min. TX Output
Multi Mode
Max. TX Output
Max. RX
Sensitivity
Max. RX Overload -8 dBm
Budget
Single-mode fiber
cables
Distance
Wavelength
Min. TX Output
Single Mode
(Standard) Max. TX Output
Max. RX
Sensitivity
Max. RX Overload -5 dBm
Budget
Single Mode Single-mode fiber
(60T) cables
Distance
Wavelength
Min. TX Output
Max. TX Output
Max. RX
R S - 40 5F series R SM -405 F series
IEEE 802.3, IEEE 802.3u, IEEE802.3x
Store & forward wire speed switching
1024
3.2 Gbps
IEEE 802.3x flow control, back pressure flow control
STP, Ring (ICP DAS)
Modbus/RTU, Modbus/TCP, OPC, STP, Cyber Ring
3 x 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX
connection
2 x 100 Base-FX
10/100M, Link/Act/Backup, Full duplex/Half duplex (Fiber Port)
1500 Vrms 1 minute
Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
50/125, 62.5/125 or 100/140 µm
2 km, (62.5/125 µm recommended) for full duplex
1300 or 1310 nm
-20 dBm
-14 dBm
-32 dBm
12 dBm
8.3/125, 8.7/125, 9/125 or 10/125 µm
30 km, (9/125 µ m recommended) for full duplex
1300 or 1310nm
-15 dBm
-8 dBm
-34 dBm
19 dBm
8.3/125, 8.7/125, 9/125 or 10/125 µm
60 km, (9/125 µm recommended) for full duplex
1300 or 1310nm
-5 dBm
0 dBm
-35 dBm
TDRS4050601
R S-405 AF series RSM -405AF series
f