Table of Contents
Advertisement
C3A, C6A, C6A HDVideoColposcope User ManualBasic Operations
3.3.4 Adjusting the Position of Keyboard Tray or Laptop Tray
If the keyboard tray or laptop tray is configured, you can adjust its position on the horizontal
direction. Either of the following methods can be used:
Hold the stand post with one hand, and rotate the tray arm around the stand post to the
desired position with the other hand.
Hold two sides of the tray with both hands, and rotate it to the desired position.
Adjust the position of the tray in a slow and gentle manner, otherwise your hands or arms
may be hit by another part of the swing arm stand and get hurt.
3.3.5 Adjusting the Monitor Angle
If the monitor supporter is configured and a monitor is installed on it, you can adjust the monitor
angle.Follow the instructions:
To adjust horizontal angle: Hold the left and right sides of the monitor with both hands, then
tilt it left or right to the desired angle.
To adjust vertical angle: Hold the top and bottom sides of the monitor with both hands, then
tilt it up or down to the desired angle.
When tilting the monitor, be careful not to jam your hands between the monitor supporter
and the monitor.
3.4 Adjusting the MT-806 Trolley
3.4.1 Placing/MovingtheTrolley
Each trolley caster has a pedal. Step down the pedal can lock the caster.
When the trolley is placed somewhere, step down the pedals to lock the casters and stop the
trolley from moving around.
When you need to move the trolley, hold the trolley handle with your hands and then push up the
pedals to release the casters. After you move the trolley to thedestination, step down the pedals
again.
3.4.2 Adjusting the Monitor Angle
If a monitor is installed on the monitor supporter of the trolley, you can adjust its angle on the
vertical direction. The operation is as follows: Hold the top and bottom sides of the monitor with
both hands, then tilt it up or down to the desired angle.
CAUTION
CAUTION
- 24 -
Advertisement
Table of Contents
