Diagnostic - HMS Networks Intesis IN700-485 Series User Manual

IN700-485 Series

12.2.7. Diagnostic

IMPORTANT
Connection with the gateway is required to use the diagnostic tools.
Figure 8. Diagnostic tab window. Find the ToolBox between the upper tabs bar and the Console view. Below it,
from left to right: Console viewer, Protocol viewers (one above the other), and the Signals viewer
This section has two main parts:
ToolBox Use the tools section to:
• Check the current hardware status of the gateway.
• Save communication logs to a ZIP file for diagnostic purposes.
• Get information on the gateway.
• Reset the gateway.
Viewers Intesis MAPS provides several viewers:
• A generic console viewer for general information about communications and the gateway status.
• A viewer for both protocols to check their current status.
• A signals viewers to simulate the BMS behavior or check the system's current values.
Page 32 of 36
Intesis MAPS: Configuration and Monitoring Tool
USER MANUAL Version 1.0