Eventide H90 Harmonizer Quick Reference Manual page 13

Parameters
Select Knob
Turn to scroll through pages of
selected , or parameters.
Quick Knobs
Turn to adjust parameter value.
Press and hold to map the
corresponding parameter to
HotKnob, expression pedal or
external controller.
Footswitch LED Buttons
Press to select , , or parameters.
Press again to Active/Bypass.
Press and hold to map , , or
parameters to HotSwitch 1, 2 or 3.
Perform Knob
Turn to adjust selected
or HotKnob value.
,
Press and hold to map HotKnob.
Footswitches
Press any Footswitch to exit Parameters Mode.
Parameters Button
Press to cycle through , or
parameter groups.
Algorithm and Preset name
Preset name
Press PRESETS and PARAMETERS to toggle Tempo Sync On/Off
Flexible Mapping: Map any parameter to a HotKnob,
expression pedal or aux switch.
HotSwitch: Press and hold FS LED Button 1, 2 or 3 to
map any parameter to three independent snapshots.
HotKnob value
Tempo Sync
11