VEGAPULS 6X • Two-wire 4 ... 20 mA/HART
14.7 Software update
The device software can be updated in the following ways:
•
Interface adapter VEGACONNECT
•
Bluetooth
Depending on the method, the following components are required:
•
Instrument
•
Voltage supply
•
Interface adapter VEGACONNECT
•
Display and adjustment module PLICSCOM with Bluetooth func-
tion
•
PC with PACTware/DTM and Bluetooth USB adapter
•
Current instrument software as file
You can find the current instrument software as well as detailed
information on the procedure in the download area of our homepage:
www.vega.com.
You can find information about the installation in the download file.
Caution:
Instruments with approvals can be bound to certain software versions.
Therefore make sure that the approval is still effective after a software
update is carried out.
You can find detailed information in the download area at
www.vega.com.
14.8 How to proceed if a repair is necessary
You can find an instrument return form as well as detailed information
about the procedure in the download area of our homepage. By doing
this you help us carry out the repair quickly and without having to call
back for needed information.
Proceed as follows in case of repair:
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Ask the agency serving you to get the address for the return ship-
ment. You can find the agency on our homepage.
14 Diagnosis, asset management and service
119