When Required; Daily Or Every 8 Hours; After The First 50 Hours; Weekly Or Every 50 Hours - SANY SY16C Operation And Maintenance Manual

Maintenance

When Required

• Replace the primary air filter according to the air filter restriction indicator. (See page 5-24.)
• Check the engine cooling system. (See page 5-29.)
• Check the track tension. (See page 5-43.)
• Inspect the bucket teeth. (See page 5-58.)
• Inspect/replace the bucket. (See page 5-59.)
• Apply grease to track spread slides. (See page 5-58.)

Daily or Every 8 Hours

• Lubricate the work equipment. (See page 5-51.)
• Inspect the machine for loose or missing components.
• Clean the operator area.
• Check all controls for smooth operation and make sure they return to the neutral position.
• Make sure all safety decals are in place and legible.
• Make sure safety equipment is in place and in operating condition.
• Check for fluid leaks.
• Check the fuel level. (See page 4-9.)
• Check the engine oil level. (See page 4-8.)
• Check the engine coolant level. (See page 4-7.)
• Check the hydraulic oil level. (See page 4-11.)
• Drain water from the fuel/water separator. (See page 4-10.)
• Check the air filters. (See page 5-24.)
• Check if the engine belt is loose or damaged. (See page 5-21.)

After the First 50 Hours

• Initial change of the engine oil and filter. (See page 5-19.)

Weekly or Every 50 Hours

• Check the battery. (See page 5-33.)
5-12
Operation and Maintenance Manual — 0420
SY16C Excavator OMM
SANY